SPECIFICATIONS & FAQ

THE PROFESSIONAL NIBBLER: A HIGH QUALITY TOOL

Cutting sheet metal using traditional methods like tin snips and grinders can be a pain. The process is slow and dangerous leaving cuts all over your hands and rough jagged edges on the roofing iron or sheet metal.

Introducing the Australian made and owned professional nibbler. No need to buy a new power tool, it fits easily and quickly on any electric or battery drill. Now you can cut anything from mild steel, rusty car panels old and new corrugated roofing iron the fast and safe way.

Stop calling in expensive tradespeople and turn those jobs you have put off from “too hard” to “can do”! With the professional nibbler.

ATTACHMENT

Fits Any 10mm Chuck

POWER SOURCES

ELECTRIC DRILL
300-500 Watts | 1500‍‍-3000 RPM

CORDLESS DRILL
Can be used on the cordless drill but will  cut a little slower. Preferably needs to be more than 1500 RPM

Ideal for small jobs eg. skylights, pops in a gutter, flutes or any small intrusions. Larger jobs will require an Electric Drill unless you have a high quality battery drill

PNUEMATIC AIR DRILL
Suitable for Pnuematic Air Drill also.

MAXIMUM RECOMMENDED GAUGES

MILD STEEL 16 GAUGE (1.6mm)
BRASS 14 GAUGE (2.0mm)
ALUMINIUM 14 GAUGE (2.0mm)
PLASTICS 14 GAUGE (2.0mm)
FIBERGLASS 14 GAUGE (2.0mm)
STAINLESS STEEL 18 GAUGE (1.0mm)
CORRUGATED IRON 21 GAUGE (0.7mm)

WHERE YOU WANT, ANY WAY YOU WANT

The Professional Nibbler cuts all manner of sheet materials with ease – no sparks, no distortion!
Just attach it to any drill and start cutting.

The Professional Nibbler can be used with standard electric drills, cordless drills and pneumatic drills.

The drill should be rated between 300 – 500 Watts with a speed of 1500 – 3000 RPM to run the Professional Nibbler properly and allow cutting of the listed materials and thicknesses.

Yes, it will run a little slower, but it will still give you a perfect, clean cut with no burr. This is ideal for small jobs (especially up on the roof, saves pulling a lead up)

Each cutter will cut 300 metres on corrugated and car panel steel. (Always spray CRC/WD40 along cutting path to extend the life of the cutting blades).

No special tools are required, and the whole job takes only a few minutes. The cutting blades can be changed by removing the Die with a standard adjustable spanner. Ensure the Die is tightened firmly once you are done.

The Professional Nibbler by Newstyle Direct P/L is guaranteed for 10 years from date of purchase. This does not include wear and tear on consumable parts. (Proof of purchase required).

The Professional Nibbler can be used to cut plastic, brass and aluminium, car panel steel, corrugated iron. The tool will enable you to build sheds, perform home renovations, mini orb, and trim decks.

The Professional Nibbler will help with any cutting job at work or around the home, workshop or farm. You can now eliminate effort and time cutting sheet metal.